If you have the opportunity, you can embed a VP tube into the plate and draw the cable under the stove. Another option is to route the cable behind the stove and through the VP tube embedded in the base of the stove.
There should be no problem having the chimney on the outside. What can happen is that cold blockages may form in the chimney pipe, preventing up-draught. This can be remedied by burning an ignition pad in the upper soot hole on the tiles stove, the air in the chimney pipe is then heated and the blockages disappears.
You can also install a Draft Booster, a flue gas fan mounted on the chimney, which you turn on when you light up the stove.
Chimney blockages are a relatively common problem in the autumn when you should put your stove into operation after it has been left unused for a long time.
No, the stove is approved for placement at 5 cm from a combustible wall. National regulations may occur. Please verify with a local professional before installation.
If you have tiles on a concrete slab, you can install the stove directly on top, but if there is a wooden floor, a hole should be made, which is smaller than the stove itself, and a foundation must be cast from the slab or the ground.
In Sweden no, you have to submit a simplified application, “building notification” with control plan, and a drawing of where the tiled stove would be, to your municipality of residence. National regulations may occur. Please verify with a local professional before installation.
Usually, a fully insulated steel chimney or a prefabricated modular chimney of the Isokern type.
No problem! A new steel or brick modular chimney can be built on top of the furnace
From 1,300 kg, it depends on the model and the height of the oven.