Kids are smart. Show them it is hot and they will not get burnt.
When the dampers are pushed in, they are closed and when they are extended they are open.
From a cold stove, full power (4kW) is achieved after 2.5 to 3 hours, but already after about 20 minutes you can feel the heat on the side of the stove. By adding a total of 11 kg of wood in two to three rounds, the heat lasts over 24 hours, provided that the damper is pushed in when only live coals remain. Note that the damper must not be pushed fully in as long as there are blue flames that spread after stirring the live coals.
A fire in the morning with about 4 kg and open dampers (if you are at home during the day, push the damper in when only the live coals remain) and one to two fires in the evening and push the damper in once the fire has died down and only the live coals remain.
No, there is no smoke at all. With air supplied directly to the tiled stove, this problem often disappears. If you have high underpressure in the house, it may be a good idea to slightly open the door while the fire is catching.
The tiled stove is normally easy to light. A lit fire with fine chopped dry wood and a lit cushion on top is all you need. If it is still warm from the previous day, it will be even faster to start.
1 year on the tile cladding, 3 years on the cassette and 5 years on the frame.
Of course.
1 year on the tile cladding, 3 years on the cassette and 5 years on the frame.
No, the stove is approved for placement at 5 cm from a combustible wall. National regulations may occur. Please verify with a local professional before installation.
If you have tiles on a concrete slab, you can install the stove directly on top, but if there is a wooden floor, a hole should be made, which is smaller than the stove itself, and a foundation must be cast from the slab or the ground.